This version of the SolarEdge 3PH Inverter, 30kW comes with a DC safety unit. This unit has a switch to turn off supply from DC side. There is also a Surge Protection Device (SPD) and various connectivity options. Connection can be via RS485, Ethernet or Wi-Fi. A Wi-Fi connection does require a separate antenna. SetApp is also available for this inverter, making commissioning and monitoring quick and easy.
Communications
Two RS485 ports are integrated, as well as an Ethernet connection. Connecting wirelessly, via Wi-Fi, requires a separate antenna. Once this connection is established, commissioning can take place via the SetApp. Monitoring the PV system is also done via SetApp. This can be done at the module level.
Security
Arc protection and leakage current detection are both available as standard. Arc protection registers arcs in the system. In most cases, these are harmless. In the event an arc reaches dangerous proportions, the arc protection device will kick in and shut down the entire system. Leakage currents, like electric arcs, occur frequently. In many cases, these too can do no harm. When it reaches a certain strength and a person comes into contact with the system, the device will shut down within 20 to 40ms. The SPD provides protection against overvoltage from lightning strikes, for example.
Safety unit
The safety unit, to be attached to the bottom of the SolarEdge 3PH Inverter, 30kW, comes with a DC switch. This allows the entire circuit to be de-energized. In fact, a bipolar disconnect ensures that both the neutral and phase wires are both interrupted.
Swivels
Instead of MC4 connectors, this type features glands. These screw glands are used to connect cables on the inside of an inverter, to a terminal block with screw connections.
ESTG is a wholesaler of inverters for solar panels and other renewable electrical items, such as charging stations, home batteries and thermal heating. With a wide range of A-brands, ESTG supplies installers throughout Europe.

Additional information

Item no.

SE30K-RW00IBNR4

Merk

SolarEdge

Manufacturer

SolarEdge

Country of origin

Israel

Statistics code

85044086

Width (mm)

317

Height (mm)

819

Weight (kg)

36.5

Warranty in years

12

Number of phases

3 phases

Depth (mm)

300

Degree of protection (IP)

IP65

Inverter type

String

Max. DC primary power (W)

45000

AC nom. output power (W)

29990

Number of MPPT

4

Suitable for outdoor installation

Yes

DC Switch

Yes

Transformer

No

Datalogger

No

Display

No

Wi-Fi

Antenna required (not included)

Ethernet

Yes

Arcing protection (AFCI)

No

Surge Protector

Type II DC & AC

Reviews

There are no reviews yet.

Be the first to review “SolarEdge 3PH Inverter, 30kW, Glens, DC safety unit with sWitch and DC SPD”

Your email address will not be published. Required fields are marked *